Tag Archives: hold-downs

2015 Update – Residential Code update for foundation anchorage

The following information deals with changes from the 2012 International Residential Code to the 2015 International Residential Code. The 2015 International Residential Code (R403.1.6) now requires anchor bolts to be located within the middle third of the width of the … Continue reading

770 total views, 2 views today

Comments Off on 2015 Update – Residential Code update for foundation anchorage

Filed under Building

Residential Code requirement for anchor bolt washer

Here is a little more information regarding my last post.  In addition to spacing and size requirements for hold-downs, the code also requires the use of specifically sized washers.  The washers must be used in conjunction with the anchor bolt … Continue reading

4,791 total views, 3 views today

Comments Off on Residential Code requirement for anchor bolt washer

Filed under Building

Residential Code requirement for foundation wall hold-downs

The residential building code (R403.1.6) requires sill plates and walls to be anchored to the foundation wall.  This is accomplished by the use of hold-downs embedded in the concrete foundation wall at fixed intervals.  Each bottom plate must be attached … Continue reading

5,308 total views, 2 views today

Comments Off on Residential Code requirement for foundation wall hold-downs

Filed under Building