Tag Archives: insulation

2015 Washington State Residential Energy Code – Insulation mark

The 2015 Washington State Energy Code (WSEC)  requires R value identification on all batt insulation over 12” in width.  There are several code sections that reference R value identification.  The first is R303.1.  which requires all equipment, materials and systems … Continue reading

524 total views, no views today

Comments Off on 2015 Washington State Residential Energy Code – Insulation mark

Filed under Building, Energy Conservation

2015 Washington State Residential Energy Code – Slab insulation

  The 2015 Washington State Energy Code (R402.2.9) requires insulation at the perimeter of both heated and unheated slab on grade floors. The example shows an instance where the insulation has been installed horizontally, but the code also allows for … Continue reading

825 total views, 4 views today

Comments Off on 2015 Washington State Residential Energy Code – Slab insulation

Filed under Energy Conservation

Residential Code requirement for access door insulation

  The 2012 International Residential Code (N1102.2.4) requires insulation at all hatches and doors that separate conditioned and non-conditioned spaces. These locations are typically found at openings to the crawl space and attic. The insulation R-value must be equivalent to … Continue reading

3,671 total views, 1 views today

Comments Off on Residential Code requirement for access door insulation

Filed under Energy Conservation

Residential Code requirement for insulation baffle

The Residential Building Code (R806.1) requires ventilation of enclosed attic and rafter spaces.  Energy requirements also mandate the use of attic insulation, which if installed improperly may either block or limit air circulation.  The code directly address this situation (R806.3) … Continue reading

23,662 total views, 6 views today

Comments Off on Residential Code requirement for insulation baffle

Filed under Energy Conservation

Residential Code requirement for insulation certificate

The building thermal envelope of each home may be comprised of various types of insulation materials and R values.  The energy section of the Residential Code (N1101.12.1) requires the placing of a certificate which details important information about the insulation. … Continue reading

5,362 total views, 6 views today

Comments Off on Residential Code requirement for insulation certificate

Filed under Energy Conservation

Residential Code requirement for attic insulation markers

The energy portion of the residential code (N1101.12.1.1) requires the installation of depth markers when blown or sprayed-in insulation is used in the attic.  The markers are necessary to determine the initial R value of the insulation during installation, as … Continue reading

25,016 total views, 4 views today

Comments Off on Residential Code requirement for attic insulation markers

Filed under Energy Conservation